Estate Fencing














Home | C.P.Gate | C.M.Gate | Fencing | T.Guard | Railings | H & G | Repairs | Details | Tech. | History





fenmax2.jpg

                     STANDARD FENCING   For more details   PLEASE SCROLL DOWN

Original Wrought Iron Estate fencing can be found in many variations across the country, but fall into two basic types:-

Hurdles 6 ft. long two end posts and one centre post, the end posts bolt together.


Continuous bar 15 ft. long 5 x 3 ft.. joint posts each end with rails over lapping, assembled on site.

We can manufacture to match an existing pattern on your property to extend or replace damaged fencing or to suit your own particular requirements in hurdles or continuous bar.

Supplied hot dip galvanized or self colour to paint or left to go rusty.

Galvanized can be painted, see "TECH" page.

Should you wish to restore your period wrought iron fencing we can supply the parts required, joint tubes, rail clips, replacement post ends etc. 

Our standard fencing is supplied in kit form to assemble on site adjustable to suit the contours of the ground, or in ready to fit sections.

The standard pitch for the post centres is set at 975 mm. (but we can supply at any pitch to suit, for example, a gap between two walls would be fenced with the centres adjusted to give an even spacing to the posts.  

   































AGfence2.JPG

FENCING USED TO TOP A RETAINING WALL.   RED RUST/WAXED  

 

AGfence1.JPG

SCROLL TOP
WICKET GATE
HANGING
FROM THE
BALL TOP
POST
pedstd.jpg
WICKET
GATES
CAN BE
SUPPLIED
IN
VARIOUS
SIZES
pedexwide.jpg
STANDARD
WICKET
GATE AS
A PAIR
pedgreen.jpg
LATCH & BOLT
DETAILS ARE
THE SAME AS
CASTLE
MEADOW
GATES
cmgate052.jpg
ESTATE
FENCING
IN THE
GARDEN
fengar.jpg
FENCING AT A
RESORVOIR VEIWING
PLATFORM.
MADE LOWER
TO CLEAR
THE EYE LINE
 
platform.JPG

panelthis1.jpg
               STANDARD FENCE SECTIONS
panelthis1.jpg
READY FOR FITTING

Supplied in kit form to assemble on site to follow the contours of the ground,
or supplied in welded sections.
 
When sections are fitted the rails of one section join the rails of the next, the top rail by a joint tube, flat rails by a cranked overlap.
 
Giving the appearance of continuous bar fencing.
 
Gradients are catered for by "sloping" sections thus keeping the posts vertical without the need for steps" in the fence line.
 
Gentle curves can be formed on site, for tight curves rails can be supplied at a specific radius.
 
Fencing can be manufactured to fit, no cutting is required.

 
Posts to be fixed in concrete, resulting in a rigid and
very firm fence with the advantage of being able
to make fine adjustments for level and straightness
before final fixing.
 
We also manufacture kissing gates, gates for access
by the disabled, stiles  etc., and of course,
features to your own design.
Height, 1.050 M. (3' 6") other heights to order.
 
FOR MORE TECHNICAL INFORMATION PLEASE GO TO TECH. ON THE NAVIGATION BAR